K31型墙持架/固定装置

Wall holder/mount for K31

2023-07-26 07:10:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Wall holder/mount for Swiss Karabiner K31, used M4 screws, the diameter of the screw head is 7.7 mm. Stick some felt or anything like that on the surface where the gun is laid on, otherwise the wood gets damaged. It is extra a little bit bigger than the real diameter of the K31 so that some felt has still enough space in it.

For mounting to the wall. First, define the height where the left mount (hinten) is mounted. Then drill a hole, put a dowel in it and screw the screw in it. You have to tighten and loosen it until the mount fits perfectly. Then, place the K31 onto the mount. Use a spirit level to even out the rifle. Then, place the right mount (vorne) to the wood around the barrel at about the place you see in the picture. Take the rifle down but hold the mount in place. Turn the mount to the side and mark the wall where the screw goes in.