JPC-7天线支架适配器

JPC-7 Antenna Spiderpole Adapter

2023-07-27 00:04:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This adapter screws into a JPC-7 Dipole Antenna Hub and slips into the top of the 7th pole section of a Spiderpole telescopic mast. To use remove sections 8 through 12 of the Spiderpole. This allows the antenna to be used at a 7m height which is ideal for 15m and 10m HF operation. Will also work respectfully on the 20m band.

For added strength, install a #10-32 x 2" machine screw and nut. If the part fails for any reason, the screw will provide some reinforcement. I included the step files so that this can be modified for other pole section diameters.

Print Settings

Printer brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20
Filament brand:
Overture
Filament color:
White
Filament material:
PLA

Post-Printing

Remove supports and install #10-32 x 2" machine screw and nut for reinforcement

How I Designed This

This was a remix of the Buddipole Versatee MastAdapter thing for the 1/2" NPT threads. I then modified the base to machine the diameter's of the pole and to provide provision for the reinforcing screw. All changes were done using the STP file in Fusion 360