BNC-203 CNT-400剥皮工具

BNC-203 CNT-400 Stripping Tool

2023-08-01 17:49:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Cuts CNT-400 50 ohms coax cable to it's 4x8x16mm lengths and required depth of the cable steps for installing BNC type plug.

Print Settings

Printer brand:
Voxelab
Printer:
Polaris 6
Rafts:
Doesn't Matter
Supports:
No
Infill:
15% Hexagon
Notes:
Print on it's back with the cable and blade slits facing upwards. I printed without a raft, but my printer is pretty dialed in.

Post-Printing

Inserting the blade

Inserting the blade is a firm fit, I used a 5mm rule and a hammer, but I've since placed 2.5mm holes to assist with a flat nail. It is very important to get the blade as centered as possible to get best cutting rules. The model does have aligning internally.

Using

I've found it best to strip the center one first, to cut the shielding where required, then the center pin, that way to get a clean cut and don't just move the pieces. Then move the longest to gently cut the out sheath.

How I Designed This

I was asked to strip the CNT-400 50 ohms coax cable to it's 9x11x19mm cuts required for the N type plug to the required depth of the cable with a Stanley blade. Yeah a 15-25 minute job per connector. Nope not going to happen.

And so the Coax Stripper was born. Now a 5 minute task with prefect results every time.