Endecker 3 S1 Pro显示器支架改进版

Ender 3 S1 Pro display mount revisited

2023-08-01 23:35:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a complete remake of the original display mount by Minus97 with the added adjustable screwholes by walklife and the extended base by selinuahs.

Removed the "PRO" branding and shaved the corner off so the piece blends in more and look like an integral part of the printer.
Reduced the height of the slide-on mechanism to save print time and filament.
Made 3 extra version with different angles to accomodate for different viewing angles, original one was the 50° version, the printed one on display here is the 60° Extra

I recommend printing sideways (the way the STLs come) with tree supports. i have not personally tested the 50°, 40° and 30° but there is no reason they shouldn't work. The only difference is the angle of the display support.