BTT智能纤维传感器安装架，适用于Ender 3v2 Neo打印机，搭配Redrex双齿轮挤出机构

BTT Smart Filiament Sensor Mount for Ender 3v2 Neo with Redrex Dual Gear Extruder

2023-08-04 07:19:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

BTT智能纤维传感器安装架，适用于Ender 3v2 Neo打印机，搭配Redrex双齿轮挤出机构

Summary

BTT Smart Filiament Sensor Mount for Ender 3v2 Neo with Redrex Dual Gear Extruder

This is remixed from TheKojent's mount because on the Ender 3v2 Neo the filiament didn't line up with the input hole on the Dual Gear Extruder. I also strengthened the part where it mounts on the bar.

The extruder is found at this link https://www.amazon.ca/gp/product/B09H6T3NNT/?tag=stockreport0a-20

I used tinkercad to split the printer mount from the sensor mount and then filled in the area in between. I then added a little to the printer mount to strengthen it from splitting.

Since had the original that TheKojent remixed from slip off I've always used a zip tie to extra secure the mount and never had a problem since. there's a version that has you use the screws that hold the z bracket but I prefer not to touch those.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20%
Filament brand:
ERYONE
Filament color:
Black
Filament material:
PETG
Notes:
If you use supports block the supports from forming in the part that mounts on the printer or you'll be digging them out with a razor knife.

I used the auto orientation plug in in cura to have it orient the face down. Alternately you can print it as is with supports. I suggest tree supports for ease of removal and block them from forming in the bolt holes.