Shield Rack for 1/144 Scale Zaku II

2023-08-04 17:43:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The 2022 Zaku II Revive comes with a cool accessory to mount most of your weapon that is available in the kit. However it doesn't fit straight out of the box because said accessory was apparently made for the High-Maneuver Zaku II that has narrower shield. In theory you could sand it down to size, but you can also print new ones to turn all of your Zaku into a walking, towering armory.

Weapons that could be mounted are : 1 Zaku Machine Gun, 1 Heat Axe, 1 Bazooka & 1 Giant Bazooka. The 2 size included in here should accomodate most HG Zaku II except FZ (correct me if I'm wrong) and be held in place simply by friction. Part with "Loose" in its name is 0.05mm wider in its inner hole and is intended to be safer for painted kit.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.4 Line Width 0.2 Layer Height
Infill:
15%
Filament brand:
Any
Filament color:
Any
Filament material:
PLA+
Notes:
Print it with the hollowed part facing up. If using resin printer change the orientation by 30 degree.