安克马可工具箱架（长边）

Ankermake Toolbox Holder (long edge)

2023-08-04 20:09:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Based on the excellent design of HelloRuiz: AnkerMake M5 Tool Case Holder.

I just changed the direction of the long edge of the toolbox facing up.
Made it a little more compact on the printer.
It's just a preference.

I also added a splitted version, so you can change direction of the toolbox as you please.
(Search for split in the filename)

For the Ankermake M5 Users, I added the sliced GCODE file for PETG so you can directly print it.

Print Settings

Printer brand:
AnkerMake
Printer:
AnkerMake M5
Rafts:
Yes
Supports:
Yes
Resolution:
0,2
Infill:
60%
Filament brand:
BASF UltraFuse
Filament color:
Orange
Filament material:
PETG
Notes:
Original Notes from HelloRuiz on his design & print:
- This is a holder for the plastic tools case that comes with the AnkerMake M5. It clamps to top horizontal bar.
- The clamp is intended to be tight, so expect some resistance when attaching.
  If you're worried about breakage, you can sand the claws of the clamp down a little bit until you're comfortable enough to push it in. Regardless, a swift, firm push is usually all that's needed. :-)
- Printed with pretty much default settings in the AnkerMake slicer.
  Normal speed, 0.2 mm layer height, etc.. Two differences:
- I'd recommend a higher infill % to ensure the clamp is strong.
  I personally printed at 60%, but YMMV.
  Make sure supports are generated for the clamp. Default zigzag settings should be fine. The underside of the clamp won't look pristine, but it won't matter since it sits on the bar, out of sight.
Note from Niko Caignie
I added brims for this one to keep the supports in place

Tags

accessory AnkerMake AnkerMake M5 Toolbox toolbox holder

License

CC BY

Ankermake Toolbox Holder
by nikocaignie is licensed under the Creative Commons - Attribution license.

安克马可工具箱架（长边）

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

Valorant 杰特的姿态
2023-03-26
车身RC 1/10 全套
2023-03-26
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）
2023-03-26
Flex Dino钥匙链
2023-03-26
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程
2024-05-02

最新模型