Vape MTL 18650型号盒式模块

Vape MTL 18650 Box Mod

2023-08-04 21:44:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

UPD: STEP file added

For a true oldschool vapers only)
Wiring diagram is simplest for diy mech mods, it have no other elements except mosfet and resistor (10K works fine in mtl mode)
It is highly recommended to use silicon-coated soft wires (awg18 for high-amperage lines required)
Max battery amperage depends from coil resistance, use special tables to get right batteries
If u don’t have a standard 510 connector, u can use textolite plate instead (see photos), two 2.5 mm bolts and two melting nuts to mount the plate. The tank can be tightly screwed into central hole (6,5mm ID)

Print Settings

Printer:
Restyl3D One
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
50
Filament brand:
BF
Filament color:
Black And Orange
Filament material:
PETG
Notes:
PETG x5 layers wall + triangle infill, .12mm layer height (.4mm nozzle ID)

Post-Printing

PARTS LIST

Bolt M2.5 x3
Nut M2.5 x1
Melting nut M2.5 x2
Bolt M3 (hidden caps) x2
Melting nut M3 x2
CEP703AL mosfet x1
10k resistor x1
Mini button 6x6x4mm x1
Piece of prototyping board 1.5mm thick x1
Textolite board 1.5mm thick, d=22mm x1
Positive connector x1
MTL Tank with 510 connector (Siren 2) x1
18650 rechargable battery x1
Wires 18awg 26awg

for better results

a surface grinding and chemical polishing recommended
it also need to impregnate prototyping board holder with glue avoid to crack

WARNING

RESTYL3D does not have any responsitivity if you will make this mtl mod. Do it all at your own risk. Many countries have prohibited vapes, or its production, buy or sell etc, is regulated by law. Also Li-Ion batteries may explode, or leak, cause thermal injury or fire, if inappropriate usage. Vaping is probably dangerous for your health. Mod creation need some advanced soldering skills. Always disconnect the battery if Mod is not in use or inattended. Electrostatic damage of mosfet transistor may cause immediately battery short cut