管道支撑点水平高度

Post (pipe) Level (Plumb Level)

2023-08-04 22:37:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Thing is a post level for verifying plumb when installing posts.

Tool requires 3 bubble levels that are 9.5mm OD and 40mm length (you can get them on Amazon for cheap).

I made this because a tree fell on my chain link fence and I had to replace a corner post. I thought thingiverse would certainly have this tool already but alas, it did not. So, I thought I would do my part and upload this for any of you gremlins that might need it in the future.

Print Settings

Printer brand:
Prusa
Printer:
i3 MK3
Rafts:
Yes
Supports:
Yes
Resolution:
.2mm
Infill:
15%
Notes:
I printed this part upside down to reduce the amount of support material because I had my support settings at "supports everywhere".

Tags

diy home homeimprovement tools

License

CC BY-NC

Post Level / Plumb Level / Pipe Level
by RustyEngineer is licensed under the Creative Commons - Attribution - Non-Commercial license.

管道支撑点水平高度

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

桌子反面的抽屉
2023-03-26
FSU - Osceola和Renegade站在小台子上 - Florida State
2024-01-13
迷你足球台球桌
2024-03-15
CG工具用于美空军F-22
2024-05-06
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）
2025-08-17

最热下载

最新模型