Nylint挖掘车履带

Nylint Backhoe Treads

2023-08-05 01:45:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Many thanks to @Bustenchops for the original file. Bonus Exhaust (print X2) included.

I was looking for replacement tracks for my 1960's Nylint Backhoe and found this model by Bustenchops for the later Tonka excavator. There isn't much information on the rubber parts for these mid-century toys but I took a chance and printed it out. The diameter of the track was good but the center alignment tabs are too wide. In Cura I lowered the Z height to 20mm (the width of the bogies) and the track fits perfectly. The track should probably be 25mm wide at the growsers to appear more scale but that's another day.

Print this using TPU or something flexible. Retraction OFF. Print Slowly (<25mm/s) Cooling fan low or off, your choice. Printed OK without supports.

Print Settings

Printer brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
doesn't matter
Filament brand:
MakeSolid
Filament color:
Black
Filament material:
FlexSolid (very much like TPU)
Notes:
Print slowly (less that 25mm/s)
Turn Off Retraction
Low cooling fan or off, your choice.
At .2mm layer, no retraction or supports this will print in about 12 hours.