Hocus Pocus - 咒语之书模型

Hocus Pocus - Book of Spells pieces

2023-08-05 02:11:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted to make a Book of Spells and was having trouble finding all of the pieces. I used https://www.thingiverse.com/thing:3190570 to make the snake corner pieces as well as the one that runs along the spine. But I still needed the front clasp, the "rope" that ties down the side, and the fingers for the spine (I didn't care about the back clasp because no one will be picking up the book).

I used the Thing hand (https://www.thingiverse.com/thing:5752028) as a starting point for the fingers. I scaled it and cut it up so that it looks like a finger and has fingernails on it.
Next, I used the rope from this design (https://grabcad.com/library/rope-2) and stretched it and cut it to make the clasp. I used 3D Builder in Windows to add the hinge pieces to it.
Lastly, I modeled the clasp that goes over the eye in 3D Builder completely. I was going for the same look at the actual book, and I think it is close enough for my liking.

In case anyone cares, the digital eye that I will be using is from Adafruit: https://www.adafruit.com/product/4300

As well as the convex glass: https://www.adafruit.com/product/3853

Those two really do look great and I recommend the purchase.

I have stuff printed in random colors because it is all going to get painted next. Best of luck, and if anyone uses these to make something, please post some pics!