3D运动鞋尖端模型

Sneaker Spurs

2023-08-05 04:10:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Looking to add some unique decoration to your boring sneakers? Tired of your shoes being the same as everyone else's? Do you commonly find yourself daydreaming of riding off into the sunset? If your answers are yes, perhaps what you need is your own pair of manly cowboy sneaker spurs.

These were heavily inspired by Daxflame's Croc Spur (https://www.thingiverse.com/thing:4842994), but the spurs slide over the heel of your sneakers (or similar shoes) instead. They're plenty comfortable to walk in, but I would strongly advise against running in them or wearing them for a long period of time without modifying them (attaching a layer of felt to the inner portion of the spur may help). I tested the spur on several different sneakers and the spur fit nicely on each. There isn't a left/right spur, the clip fits both left/right shoes.

The sneaker spur clip should be printed angled side-down (refer to Cura screenshot above); same with the spur wheel. Once printed, the current method used to assemble the pieces is to remove all support and insert a short length of filament through the clip as an axle. Both ends can then be glued with whatever glue prefer and trimmed flush with cutters or a hobby knife. I think I'll make a new way to assemble the pieces in the future. If anyone would appreciate an F3D file (native Fusion 360 file) please let me know.

EDITS:

Added a Complete assembly file; this model has the spur floating in the correct position relative to the clip, with a new axle as well. I printed this file myself, and although it turned out great, the support removal was quite lengthy and difficult.
Added an alternate spur shape, might make some others as well for variety. I'll take suggestions for any new shape ideas as well!