Enders MK8到JHV6转换件

Ender MK8 to JHV6-conversion bracket

2023-08-05 05:17:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My printing-recommendation material is PETG or ABS in 0.2mm layers, 50% infill with normal supports everywhere. Only the airnozzle must be printed with supports on bed only.

MOD I: Conversion only, use original hotend-cooler or 40mm-raiser

MODII: add BL- or 3D-Touch and/or

MODIII: Partcooling added*

MODIV: Mirrored fanholder for dual-fan-partcooling/no bltouch option

In dependance to the Hotend-lenght you may need a smaller Shroud. In this case use the "V6Halter-Duese_sm.stl" wich will be 3mm shorter.

I tested the kit at a Mega Zero 2.0 with Ender-3 X-axis-carrier. It is working fine!

I modified the base to become compatible with the original Mega Zero x-carrier-plate. In cause of the x-switch and the role-screw the bl-touch can only applied at the right side.

After testing the dual fan mod I recommend you to isolate the hotend with a silicone soxs. The fans are hard blowing and make the hotend temperature unreachable.