7.92×57毫米 Mauser仿制步枪3D模型及快板罩

7.92x57mm Mauser replica and snap cap

2023-08-05 06:10:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

7.92x57mm Mauser, also known as 8mm Mauser, 8x57mm, or 8x57 IS, is a centerfire rifle cartridge designed in Germany by the Gewehr-Prufungskommission in 1903.

Print this for props, display, education, training, just because it's cool, or scale it up to become a container.

Contains 5 files:

Accurately sized replica: 7.92x57mmMauser_cartridge.stl
Separate bullet and case pieces for easily printing in different colors: 7.92x57mmMauser_bullet.stl and 7.92x57mmMauser_case.stl
Snap cap/dummy round for cycle and dry fire practice, with firing pin hole and reduced bullet size: 7.92x57mmMauser_snapcap.stl
Information txt file with recommended print settings: 7.92x57mmMauser_info.txt

If you like this model, please consider donating: https://paypal.me/spearmountain

Print Settings

Notes:
- Material: Tested with PLA and PLA+/PLA Pro.
- Overall print size: 82mm tall, 11.95mm diameter.
- Layer Height/Quality: 0.16mm or less recommended, 0.12mm works best.
- Infill: 20% is fine for display, 60% or more recommended for snap cap use.
- Print Speed: 50mm/s or less recommended. I do 40mm/s for cartridge, snap cap, and case piece; then 30mm/s for bullet piece. I also do 10mm/s initial layer speed.
- Adhesion: A brim might be needed, depending on the printer and bed type. I have a textured PEI bed, and with proper calibration, additional adhesion isn't needed.
- Post print: The pieces may require some sanding or filing for proper fitment if the bottom layers bulged out a little. Fitment should be a little snug, but easy to take in and out. A properly calibrated setup shouldn't need additional work.