猛虎运输基地

Leopard Dropship Base

2023-08-05 13:31:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a base for the Leopard Class Dropship, which needs to be scaled down to 43.82% to be truly map scale (1 hex = 30m, Leopard length=65.5m so at map scale the Leopard should be just over 2 hexes or 2in long). The base is seven hexes in size to match the rules-mandated footprint for a grounded dropship. Labels along each side name the firing arc those hexes represent

To print, you should place the BaseHole2.stl in the same coordinate position as the Base.stl and have the slicer treat it as a hole.

I have not test printed this version yet but I made the holes a little larger than the pegs in the two support stls because I had a little bit of an issue with it prior, though I think some of that will depend on the type of resin you use.

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO MARS 3
Rafts:
Yes
Supports:
Yes
Notes:
The base can be printed directly on the bed but the two supports will need supporting as they are a bit awkward in shape.