备用熔断器架

Spare Fuse Holder

2023-08-05 18:01:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Heyho

I recently installed some electronics to my friends van.

To give him some spare fuses next to the electronic devices I designed this fuse holder.

You can insert

1 x MEGA- Fuse (megaOTO)
3 x Midi- Fuse (midiOTO)
4 x Standard Car Fuses (normOTO)

To mount the Holder to a wall I used two 3 x 20 mm screws.

Additional you may use two M3 x 10 mm Screws to secure the midi- and mega Fuses. But I did not need to do that since they should not fall out of the holder.

Note: If you have not the best tolerances with your printer you might want to scale the Model up about 2% so you don´t have trouble to load the fuses into the holder. But I didn´t test that yet since My holder works perfect as it is!

Have fun and keep printin!

Tags

aufrumen auto Bulli bus cable camper car electronic Elektronik ersatz Ersatzteil Fuse fusebox halter Halterung holder KFZ management organisieren organize Sicherung Sicherungshalterung spare van vanlife

License

CC BY-NC-SA

Spare Fuse Holder
by MeisterEdel is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

备用熔断器架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）
2023-03-26
螺旋齿轮玩具3D模型
2023-03-26
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）
2023-03-26
Flex Dino钥匙链
2023-03-26
Kumonga的孩子与澳大利亚蜘蛛驯兽队
2024-03-17

最新模型