NerdMiner V2空气流动案例模型

NerdMiner V2 case with airflow

2023-08-05 21:08:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I created a case for BitMakers NerdMiner V2. It has an optimized air flow. I'm using a 30mm 5V fan and a 14mm heatsink from the Raspberry Pi accessories. The temperature is now stable at around 38 - 40°C.

I use M2.5 screws to attach the fan and the mounting frame. Small wood screws should also work, though. Optionally, some foam rubber can be clamped or glued in between the dem, mounting frame and circuit board.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
15%
Filament brand:
Geetech
Filament color:
yellow
Filament material:
PLA
Notes:
If you like my version of the case, feel free to send me some Satoshis to my Lightning address! ;-)

puffyshake21@walletofsatoshi.com

........happy mining!