四态QRP (4SQRP) EFHW天线实验板箱体
Enclosure for Four State QRP (4SQRP) EFHW Antenna Experimenter Board
2023-08-06 04:33:04
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is an enclosure for the 4SQRP EFHW Experimenter Board. This kit is used to build an Unun for an EFHW antenna. The PCB press fits into the case, and the top holds the PCB in place. m3x6 screws are used to secure the top to the case. I used two insulated binding posts that I had in my parts bin for the EFHW and counterpoise wire connections. However, two small screws could be just as easily used. This is not designed to be permanently mounted outdoors. It is intended to be used for portable operations. -Steve WD4CFN
Print Settings
- Printer brand:
MakerGear
- Printer:
MakerGear M2
- Supports:Yes
- Resolution:0.25mm
- Infill:15%
- Filament brand:
eSun
- Filament material:
PLA+
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
紧急哨声器 小型超响2025-06-18 -
J70火车（托比）3D模型2023-04-03 -
Max Stryker与Nexus Pro轨道支撑架2023-06-13 -
3D模型标题：用于把手连接的支架夹具2024-01-08 -
丁丁模型2024-04-22
最热下载
-
鸡蛋绘画机迷你（Eggbot衍生版）v1.12025-07-16 -
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23 -
BF1 单枪手机 08/18型号 Lego2024-03-23 -
浴室排水器2024-04-07
最新模型
-
blink门铃钥匙2024-05-08 -
3D美国国旗模型2024-05-08 -
外部电机用鼓风机2024-05-06 -
单行式钻石钻袋持有器（10个插槽）2024-05-06 -
FAN SHROUD FOR PWNCNC VFD2024-05-06