Bambu Lab X1C 抗震脚架适配器
Bambu Lab X1C Anti-Vibration Feet Adapter
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This design is an adapted version of the original found at https://www.thingiverse.com/thing:6107428.
I have bought two sets of the original Bambu Lab anti-vibration feet. However, positioning the 3D printer in a corner presents a significant challenge due to annoying propensity of the foot nearest to the wall to frequently dislodge from the foot connection aperture. Moreover, the substantial weight of the printer adds to the complexity of the issue.
This adapter somewhat solves this problem. It enhances the clearance, enabling an easier access to the foot connector. One could additionally glue/screw/bolt feet to to the adapter, and position it afterwards. In my case, it was not necessary.
Print Settings
- Rafts:No
- Supports:Yes
- Filament brand:
eSUN
- Filament material:
PLA+
Tags
License
Bambu Lab X1C Anti-Vibration Feet Adapter
by night-crawler is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
垂直货架固定支架2024-05-08 -
本田Civic 5D暖气阀门控制装置2024-05-08 -
泡泡魔杖瓶架2024-05-06 -
通用电线指南2024-05-06 -
T细胞支撑结构 - 坚固底座2024-05-06
最热下载
-
桌子反面的抽屉2023-03-26 -
苹果 HomePod mini壁挂装饰2024-03-19 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
定制升降装置 1x1型2024-04-21 -
基础鸟饲料架2024-04-30