Creality K1 MAX 侧边安装滚筒托盘

Creality K1 MAX Side Mounted Spool Holder

2023-08-06 08:35:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Creality K1 MAX 侧边安装滚筒托盘

Creality K1 MAX 侧边安装滚筒托盘

Summary

Hi, used these two great models, one from Fred Boisselier, https://www.printables.com/model/540699-creality-k1-max-side-load-spool-holder and the other from Hugo Groeneveld, https://www.thingiverse.com/thing:3020026 to create an excellent side mounted spool holder with bearings for the K1 Max.

This model replaces the one center back screw with (M312) and the bottom right fan screw with (M314) for mounting.

You will also need 2 x 608 type bearings.

Updated: Added model with K1 Max logo.

Updated: Added model with filament tube guide with thanks to ThomaS, https://www.printables.com/model/552999-creality-k1-max-side-mounted-spool-holder-with-pft great help.

Updated: Added model that only requires the original spool holder as requested by many.

Updated: Added model with built in spool and ptfe holder, doesn't roll as freely keeping the filament tighter preventing tangles. Hole is 4mm for ptfe tube, if you would like a fitting instead, you can drill it out and tap as required.

License

CC BY-NC-SA

Creality K1 MAX Side Mounted Spool Holder
by SHaDoW6 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

Creality K1 MAX 侧边安装滚筒托盘

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

Smart Pistol Kit for Airsoft ICS BLE XAE (Titanfall 2) (Tracer Unit Cover)
2023-03-26
Gilette融合式墙挂装
2023-06-10
沃尔沃C70前排头衔线夹具
2024-01-17
WDP40盖 - 自动喷雾空气清新剂盖
2024-01-17
桌面上夹持斯坦利/耶蒂杯子夹具
2024-03-25

最热下载

最新模型