Creality K1 MAX 右侧安装式胶卷托盘

Creality K1 MAX Right Side Mounted Spool Holder

2023-08-06 08:48:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Creality K1 MAX 右侧安装式胶卷托盘

Creality K1 MAX 右侧安装式胶卷托盘

Summary

Hi, I used a great models from Hugo Groeneveld over at https://www.thingiverse.com/thing:3020026 to create an excellent side mounted spool holder with bearings for the K1 Max.

This model replaces the two back screws with (M3*10) for mounting. You can mount high by using top and middle screws or at the bottom by using middle and bottom screws.

You will also need 2 x 608 type bearings.

Updated: Added model with K1 Max logo and filament tube guide.

Updated: Added model with more support to filament roller area, also changed K1 and Creality font.

Updated: Added model as above but with factory spool holder mount.

Updated: Added model with built in spool and ptfe holder, doesn't roll as freely keeping the filament tighter preventing tangles. Hole is 4mm for ptfe tube, if you would like a fitting instead, you can drill it out and tap as required.

Print Settings

Resolution:
.2
Infill:
30% Triangle
Filament brand:
VOXELAB
Filament color:
Ok Yellow
Filament material:
PLA+

License

CC BY-NC-SA

Creality K1 MAX Right Side Mounted Spool Holder
by SHaDoW6 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

Creality K1 MAX 右侧安装式胶卷托盘

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型