Scrog复杂机械载具

Scrog mount

2023-08-06 19:32:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Scrog mounting design for one or more pieces of mesh to grow your herbs. Or peppers or something...

It is designed to fit on a DIY bubble bucket hydroponics / (R)DWC. It fits on a Euronorm bucket lid (30 x 40 cm). Of course you can also print only the upper parts and push the plant stakes into the soil.

In addition to the 3D printed parts, I used 11 mm plant sticks from the Hornbach, mesh with a thickness of 4 mm and a mesh size of 10 cm.

The bolts, nuts and washers used are:

4x M5 x 30
4x M5 nut
4x M5 Washer
4x M6 x 50
4x M6 x 20
4x M6 Nylock nut (so they don't fall off into the water)
4x M6 nut
8x big M6 washer
4x small M6 washer

Small explanation of the parts:

The drill tool is used as a mold to drill the bucket lid, as shown in the photo.

The lid part should be printed 4 times: 2x normal and 2x mirrored. Just like the Scrog mount parts.

To mount the mesh in Scrog mount, Scrog mount plate falls into the slot. Then the M5 x 30 mm bolt with M-5_knob can be screwed on.

The grey parts (connected to the mesh) are printed in PLA, the rest in ABS.

I think the photos together with the necessary parts give enough information for this DIY project. If you have any questions, please feel free to ask me.

A small contribution to the community, I hope it helps others too.

Peace, Cannatommy✌️