22mm & 28mm 把手电压计安装架
Voltgauge Mount for 22 & 28mm Handlebar, voltage gauge, DRZ
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I made this for my Suzuki DR-Z to check the Batterie, but this can be used on any motorbike with a 22mm or 28mm Handlebar. Just take the + signal behind the ignition to make sure the gauge doesn't stays on all the time.
I used this voltgauge:
https://de.aliexpress.com/item/32953332461.html?gatewayAdapt=glo2deu
I used M3 x 5,7mm fusible threads on Part 1 to connect the two parts.
Print Settings
- Printer brand:
Flsun
- Printer:
Flsun Q5
- Rafts:No
- Supports:Yes
- Resolution:0.25
- Infill:>30%
- Filament brand:
eSUN
- Filament material:
PLA+
- Notes:
Position the parts as they will be mounted later.
Part 2: Use supports only on this part and make sure that support roof is activated to ensure a good surface on the curve and easy removal of the support.
Even if there is not a big load on the component, I recommend printing with PLA+ or better PETG to counteract effects from the sun.
Tags
License
Voltgauge Mount for 22 & 28mm Handlebar, voltage gauge, DRZ
by Thuyan is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
40mm立方体测试对象2023-03-27 -
科罗拉多矿业学院2023-05-08 -
Plexiglas 打印机外壳设计优良通风2023-05-10 -
巨人的武器2024-04-17 -
足球与高尔夫球2024-04-19
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
红米手表4号充电基座2024-03-15 -
Dado - 立方体模型2024-03-24 -
GTA 5 大地图模型2024-04-21
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
任意立方体活动关节的一体打印外星人2025-07-19 -
巴黎卢浮宫的三圣母像2025-07-16 -
大码动漫女战士2025-07-15 -
苍井空老师全身像苍井空跪姿2025-06-27