Wurth WR-WST 兼容型 IDC_die_tool

Wurth WR-WST compat. IDC Die Tool

2023-08-06 23:36:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

"Traditional" IDC cable assembly techniques not working? Tired of destroying your WR-WST connector pins when trying to press them onto ribbon cable? Don't have the right tool?

This is a WR-WST die for pressing the SKEDD IDC connectors onto the ribbon cable.

Simply attach to your WR-WST connector, preload your vise (or arbor press), insert your ribbon cable, and clamp to assemble.

This 3d print is neither made nor endorsed by the original connector vendor and is provided as a tool for enthusiasts and hobbyists. Use at your own discretion.

How I Designed This

Before Designing

I used the "traditional" techniques to attach my IDC cables before encountering any that were challenging such as the WR-WST.

The "traditional" technique uses a vise or arbor press to press the IDC connector into place on the ribbon cable.

Steps During Designing

Since this is my first time using FreeCAD to design my solids, I had a hard time figuring out how to create perimeters in sketches. Apparently, it's somewhat different from how other programs do it.

Since I am already used to making very complicated sketches with editable parameters, the "spreadsheet"-able sketches in FreeCAD did not deter me.

During this process, I had my "pockets" completely missing or reversed. It was a good learning process, and we have a usable die at the end of the day.