MRP叉架轴承螺栓保持装置

Retainer for axle nut of a MRP fork

2023-08-07 00:03:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The nut at the axle of a MRP Ribbon fork spins as you screw in the axle. This is annoying as you have to find the correct position of the nut to have the axle lever in the desired position.

This retainer fits over the nut and keeps the nut from spinning. To use it, screw in your axle and set the lever to the right position. Then put the retainer over the nut, aligned so that the nose fits in the small cutout of the fork. You may have to correct the position of the nut a bit, because the nose can only fit in one of 12 positions.

The ring at the retainer should be located at the outside. It helps to remove the retainer.

I made it for my MRP Ribbon, but may work for other MRP forks as well. Please let me know if you verify this with other forks.

I printed that in PETG with a 0.3mm nozzle and 0.25mm layer height on my Prusa mini.