Raspberry Pi 4壳安装支架，可选30毫米或GPIO接口配置，支持滑动支架设计。
Raspberry Pi 4 case mount with 30mm and/or GPIO options REMIX to include slide mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I thought I'd create a REMIX of my case, in order to not get the post mixed up into a mish mash of cases.
The original case is here:
https://www.thingiverse.com/thing:6158413
Where the top part of the case can be found, as there is an option for GPIO.
This case slides into the mount and is retained by a push clip.
The clip needs supports, most likely.
The case in the image was printed in PETG as I find the flex handy but I'm sure PLA would also suit.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:0.2
- Infill:10
- Filament brand:
Eryone
- Filament color:
yellow
- Filament material:
PETG
- Notes:
PLA would probably suit too but I used PETG
Tags
License
Raspberry Pi 4 case mount with 30mm and/or GPIO options REMIX to include slide mount
by cmag16 is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
可爱的大眼睛（手机版）无镜片3D模型2023-03-26 -
地球巨人（加入我们的 Patreon）2023-03-26 -
Iron Man Mark 46头像 - 内战2023-03-26 -
osVAC新型法兰饼夹具（M25）2024-03-17 -
Daft Punk 耳垫配件（适用于DmitriK42头盔）2024-03-26
最热下载
-
凯弗·鬼魂追踪者2024-01-18 -
原始控制舱2024-03-25 -
Woods Mower 30922 护盾保持者2024-04-24 -
比基尼模型2025-07-16 -
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17
最新模型
-
纸张 APC T132024-05-08 -
灭霸4U控制器底座2024-05-08 -
外部电机用鼓风机2024-05-06 -
通用电线指南2024-05-06
