Raspberry Pi 4 外壳安装套件

Raspberry Pi 4 case mount with 30mm and/or GPIO options

2023-08-07 04:19:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Nothing new but I just thought I'd share my design.

This was originally to mount a RPi 4 under a desk, which housed my printer.
Then I used for multiple projects, such as a bird box.
I wanted the case to be as thing as possible, to keep cool and allow air flow.

To get the pattern and air flow for the top of the case, I used a modifier within the slicer (prucer slicer) and used the honey comb infill - with 0 top and bottom layers.
Printed the sides slow, to try and avoid stringing, although that can be removed easilly.

Options:
Pi 4 Case with 30mm fan
Pi 4 case with 30mm fan and GPIO access

The brass inserts are M3 with M3 bolts. Depending on the filament, you may need to clean up the holes for the bolts, as I've made sure they are a tight fit to cut the threads.