小松鼠手掌

Little Badger Grip

2023-08-07 05:00:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a grip for the Little Badger Rifle. The bare grip on the rifle is not very ergonomic for me and I felt most of the pistol grip options are set at an awkward angle, so I designed this to emulate more of a standard rifle grip.

It slides onto the short rail section behind the trigger guard and secures with a short m5 screw (I used a m5 x 12 screw and a small washer, make sure your screw is short enough to not bottom out internally).

For the sling mount version, you'll need a QD sling cup (I designed the model for this one specifically) Simply insert the cup and screw in the included machine screw to secure it (optionally a dab of glue/epoxy would help)

NOTE: This is not designed for a standard Picatinny rail. The grip rail on this rifle is very similar but much narrower.

Print Settings

Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2 or finer is optimal
Infill:
60+
Filament brand:
Overture
Filament material:
PETG
Notes:
Print on the flat face opposite the rail mount (See screenshot for reference). Use supports for the mounting screw hole. I used a .8 nozzle at .2 layer heights to test.