强劲与修身款钱包V5 - [无胶水/无螺丝]

Strong & slim wallet V5 - [no glue / no screws]

2023-08-07 07:27:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hello! This is the fifth version of my own wallet, after numerous improvements, the final characteristics of this new model are the following:

-Customizable (You can put a QR on the lid or put pieces of different colors)
-Easier to assemble (just fit the pieces together and close the sliding lid)
-More comfortable to use (due to the new shape of the lever and the outer casing)
-It is much more resistant (inside and outside)
-It is more robust

⚠ Notes:

Maximum number of cards: 6
When the wallet is empty and you are going to insert cards, you have to insert them at an angle so as not to break the top of the lever that prevents the cards from accidentally coming out once they are inside

⚠ Animated assembly guide:

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
0.20 mm (for a good quality/time ratio)
Infill:
100%
Filament brand:
Sakata 3D
Filament color:
Grey and black
Filament material:
PLA
Notes:
- If you want a matte finish I recommend sanding the pieces.
- Use tree supports to print the case.
- Print all the pieces lying down to achieve greater resistance and quality.
- When you go to assemble the pieces inside the wallet, it may seem that they do not fit through the edge of the casing, but everything has the exact size so that it fits, it just takes a little skill and not forcing the pieces.
- It is possible that the lever is difficult to fit into place since the measurement is a little tight, but necessary for greater resistance, if it helps you, you can help yourself with a non-pointed tool like a chisel and hit it so that it goes inside
- The way to close the wallet with the lid is to insert it a little at an angle to be able to mount it on the stop that is in the base piece and then to be able to close it by pressing it by tapping it with, for example, the handle of a screwdriver.
- I recommend the use of organic or tree supports to print the base and remove them without problems
Temperatures:
Nozzle 215ºC
Bed 55ºC

⚠WARNING!!!!

SINCE THERE ARE PARTS THAT HAVE TO BE FITTED WITH PRESSURE AND HITTING THEM, ALWAYS PROTECT YOUR EYES AND THOSE OF PEOPLE WHO ARE NEAR BY IN CASE SOME PLASTIC FRAGMENT IS FIRED.