前臂尺子模板

Forearm Ruler Stencil

2023-08-07 17:34:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a stencil for a 10cm ruler you can paint on your forearm:

Instructions:

Preparation: A fine point sharpie and 20 cm of masking tape.

1) Put a piece of masking tape at each end of the ruler
2) Place the ruler on your non-dominant forearm and hold it in place with the masking tape.
3) Use a fine tip pen or sharpie to draw the lines, guided by the stencil.

4) You can use the cm section, the inches section or both!
5) If you use a sharpie, you can easily remove the ink from your skin with a cloth damped in Isopropyl Alcohol.

Enjoy whatever DIY you do.

I got this idea from Adam Savage, but I didn't feel like tattooing the thing on my arm:

https://ar.pinterest.com/pin/355010383128196028/

About the design:

This is designed for the LEFT forearm, although it can be used on either arm.
The reason why the half-centimiter marks are closer to the wrist, is because I've found that part of the skin stretches and contract less, allowing better precision.
If you wear a wristwatch, you may use it to keep the ruler in place while painting the stripes, allowing you to clear the first markings away from your watch.
Version 3 has longer lines, version 5 has shorter lines for a less invasive ruler

Tags

adam Forearm ruler savage stencil

License

CC BY

Forearm Ruler Stencil
by rodcastler is licensed under the Creative Commons - Attribution license.

前臂尺子模板

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）
2023-03-26
Glock 17/34 Solidworks 模型文件
2023-04-21
安益卡通 i3 迷你 HGX 轻量挤出器
2024-04-21
适用于ebyte E104-BT5040U USB适配器的外壳
2024-04-28
HGX lite v2支架
2025-07-18

最新模型