星链后置固定架

Starlink Post Mount

2023-08-07 21:33:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here is how I mounted my rectangular Starlink antenna to the top of a post. The mount is designed for a 4x4 (or larger) post.

I made this thinking it may be a temporary solution until I get around to buying a metal one. But it may remain in use for a while.

Print Settings

Printer:
Folger Tech FT-5
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30% cubic
Filament brand:
Matter Hackers
Filament color:
White
Filament material:
ABS
Notes:
I used ABS with a brim. Other materials like PETG could also be used. I used 5 walls and 8 top/bottom layers.

Post-Printing

Attach the mount to your post with four 3/8" lag screws and washers. Then the Starlink antenna snaps into the mount.

How I Designed This

Designed with FreeCAD, source file is attached.

Tags

Antenna holder antenna mount Fencepost fence post mount openbeam post post-apocalyptic satellite satellite antenna Starlink

License

CC BY-NC-SA

Starlink Post Mount
by wakuhn is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

星链后置固定架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

Fpv 2.5英寸框架（用于DJI O3 Air无人机，配备TBS天线）
2023-04-08
HP Reverb G1 有线绑架
2023-04-09
微软摄像头电影院版外壳
2023-04-12
工具箱和克雷艾利S1 Pro剪刀的适配器
2023-06-17
彩虹伙伴
2024-05-08

最热下载

最新模型