2英寸点击锁定装置专用望远镜后部防尘罩
Telescope Rear Dust Cover for 2" clicklock
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a dust cap for a telescope. It is to cover the focuser end opening if you use a Baader 2" Clicklock. It may also work on standard 2" compression openings, however it is specifically fitted for the Baader Clicklock.
the dust cap features an integrated desiccant holder which is held in place by a 3d printed snap ring.
I specifically use 3gram round desiccants that are 30.6mm in diameter, (available here: https://www.amazon.com/dp/B09FXR6NC4?ref=ppx_yo2ov_dt_b_product_details&th=1)
You may need to redesign the snap ring for your particular desiccant choice.
Print Settings
- Printer:
Qidi X-Max
- Rafts:No
- Supports:No
- Resolution:.2mm
- Infill:minimal
- Filament brand:
Hatchbox
- Filament color:
whatever you want
- Filament material:
PETG or PLA
Tags
License
Telescope Rear Dust Cover for 2" clicklock
by ChristineZ_42 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
联系我们
热门推荐
-
Huion Kamvas 24 Plus 配件支架2023-04-04 -
300毫升Marinelli型号试管，适用于Radex Obsidian2024-04-04 -
3D模型: Lula2024-04-07 -
被放逐的雕刻2024-04-24
最热下载
-
可定制像素珠子照片面板2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
红米手表4号充电基座2024-03-15 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
任意立方体活动关节的一体打印外星人2025-07-19 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
高跟鞋鞋架2025-07-17