Gaciron V13支架

Gaciron V13 mount

2023-08-08 06:03:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Gaciron V13 headlight mount on a 22mm bike handlebar instead of the standard one.
Attached are two versions of the upper part: for fixing with standard screws and two 3mm screws (because the standard ones are too narrow and eventually broke).
For assembly you will need:
Screw M4*20mm
Nut M4
Axis for hinge. I used 3mm steel wire, for which I drilled a hole in the parts.

For the version with 3mm screws, you will also need two screws M3*10mm

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament brand:
ESUN
Filament material:
PLA
Notes:
Important: the wall is 4 perimeters thick (with a nozzle of 0.4 mm), the thickness of the cover / bottom is at least 5 layers