BIGTREEETECH PI V1.2 外壳
BIGTREEETECH PI V1.2 ENCLOSURE
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
BIGTREETECH Pi V1.2 ENCLOSURE
I've been testing different designs and this is the most effective in terms of heat dissipation:
- BASE_BBT_PI_V1.2.stl
- FAN_SUPPORT_BBT_PI_V1.2.stl
The red heatsink BTT's Pi is provided with, is good and generous.
This said, I still recommend active cooling if you plan to place this Pi inside your printer (or in any other closed spaces whatever your Pi is supposed to do).
Tests done so far with only passive cooling (OS: Armbian 23.5 Bookworm):
- Octoprint on Armbian (RAM load around 240 MB)
- Armbian + LXDE core (RAM load < 400 MB).
It does simple jobs nicely, but climbs up to 60C (in summer).
Temperature readings running a 4010 (OS: Armbian 23.5 Bookworm+LXDE core):
- 45/46C under load (copying files while reproducing multimedia content trough LAN)
- Running Octoprint on Armbian this BTT PI remains at 39/40C
- BTT's Klipper remains around 40C
Things you need:
5 mm long pieces of PTFE tube to make spacers.
M2 or M2,5 screws and nuts to fix the board to the base.
To fix the fan support I used small 12 mm wood screws
M3 x 12 or 14 mm. Washers and nuts or locking nuts to fix the fan
Get a 5V 4010 fan to be plugged to the board.
To fix the enclosure to your printer you can use 2 flat round head wood screws. This probably requires drilling 2 little holes into your printer's enclosure (see last picture).
I don't recommend the use of double sided adhesive tape for this purpose.
UPDATE as per 2023.08.18.
3 new base-STLs were added.
b1 and b2 look a bit bulky but will facilitate attachment to frames made of aluminium profiles 2020 / 2040.
In addition to the small stuff mentioned above BASE_BBT_PI_V1.2_b1.stl and BASE_BBT_PI_V1.2_b2.stl will require:
2 x T-Nuts (4 mm bore)
2 x M4-10 mm and
2 washers
A really nice little board!
Enjoy!
O.
BIGTREETECH Pi V1.2
BTT Pi V1.2
License
BIGTREETECH Pi V1.2 ENCLOSURE
by VisiTor is licensed under the Creative Commons - Attribution license.
猜你喜欢
联系我们
最新模型
-
谷歌家庭mini的星门显示屏(修正版)2024-05-08
-
垂直货架固定支架2024-05-08
-
空气箱盖2024-05-08
-
浴室里的男人建模2024-05-08
-
乐高风格圆润光剑模型2024-05-06
最热下载
-
预组装的百合花盒子2023-03-26
-
FPV 模型:原型坦克配备炮塔2023-03-26
-
Wolf系列手机支架2024-03-26
-
法兰尺寸测量工具(小)2024-04-19
-
Enders 3版控制面板2024-05-08