XTool 角落小物件
XTool Corner Thingy
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I needed something that would hold the material tight against the corner jig when I was engraving or cutting on my XTool D1 Laser.
I needed something that was thinner than any of the material I was working with but stiff enough to hold it in place.
I put a knob/handle at the end opposite the end that was actually pushed against the material to be able to lift or move it as needed.
Beneath the handle is a pocket to glue a 14.90 mm diameter by 1.65 mm magnet to hold it in place on the honeycomb.
I printed it on my Bambu Labs X1
I used the default setting for PLA+
I used the largest magnet in this set I got from Amazon .
Here is the link:
Tags
License
XTool Corner Thingy
by OldUncleTomTom is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
最新模型
-
圣诞主题旋转木马2024-05-08 -
轴向杯托2024-05-08 -
SkiErg表盘固定架2024-05-06 -
适用于Qidi Q1 Pro的额外风扇导气管2024-05-06 -
福克斯尘埃清扫密封压紧装置，36毫米直径2024-05-06
最热下载
-
Wolf系列手机支架2024-03-26 -
21700毫安电池单元保持架2024-04-06 -
3D模型标题1：kp3s orca slicer2024-04-07
