Compaq ProSignia 3.5" drive mounting rails
2023-08-08 08:04:09
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
These are mounting rails for the four 3.5" slots of the original Compaq ProSignia server case. This case is used for the following Compaq Servers
- ProSignia (the product label says "Model 3080")
- ProSignia 500 (the product label says "Model 3085")
You need two per drive. The screw holes are smaller than the holes in the original rails to not require the special Compaq screw, but work with standard UNC#6-32 screws.
This thing is substitutes the original Compaq part numbers
- 139975-001
- 143856-001
It might also be a replacement for these part numbers (but please verify yourself)
- 141945-001
The names listed for this items by various spare parts sellers include:
- Kit Sps-Hdd Rtnr Sidemt
- snap-in drive mounting rail
- DISK R/M RAIL
- Swizzle Sticks (Green)
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
联系我们
邮箱: 289047960@qq.com
热门推荐
-
六边形金字塔2023-03-26 -
地心版怪兽型6x18针孔Gamera2023-03-27 -
特斯拉Model Y（及Model 3？）座椅轨道末端盖2024-03-19 -
HWS用参数化偏移钥匙孔钩2024-04-13 -
Ikea 米兹顿 插嵌2024-04-20
最热下载
-
尼克公司仿生假手指V3.5.5版2023-03-26 -
30.5mm到25mm转换板（用于飞行控制器堆叠结构）2023-04-03 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02 -
巴黎卢浮宫的三圣母像2025-07-16 -
HGX lite v2支架2025-07-18
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
任意立方体活动关节的一体打印外星人2025-07-19 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
泡泡底拖鞋2025-07-17 -
Yeezy Foam Runner Adidas运动鞋2025-07-16