HPI微型RS4电池座顶板（配备XT30接口）

HPI micro RS4 battery mount top plate with XT30 mount

2023-08-08 17:57:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Top Plate with integrated battery holder (HRC Power 2S 2400mAh)

Verlcro straps: 140x10x1,5mm

Integrated XT30 mount so you dont have to fiddle with the connectors... just glue in the XT30 on the ESC side. (Press fit+glue, im waiting for my new ESC)

I printed a prototype in PLA, plenty strong (stiffer than the original part) but i printed the final Version in Polymaker PA6CF Nylon to make sure it wont soften due to the heat from the motor or leaving it in a car.

No Supports required

Battery i use: https://www.trashop.eu/hrc-racing-akku-lipo-2s-7-4v-2400mah-50c-rc-car-micro-hrc-power-2400-ultra-t-deans-kompatible-stecker-hrc04224d.html