五维空间绘图师

Pentadrafter

2023-08-08 22:12:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This puzzle is only suitable for fans of polyform puzzles. It has only 2 solutions and is so challenging that it is practically unsolvable without the help of a solving program. It is more interesting to use the solving program Polysolver to find symmetric figures for the Pentadrafters.

Polydrafters consist of connected triangles with interior angles of 30°, 60°, and 90°. There are 14 Pentadrafters that fit into the Drafter grid.

The puzzle consists of 14 puzzle pieces and a slider box.

The puzzle pieces are used on both sides.

3D Printing Tips
Most of the game pieces have acute angles. They tend to warp. Therefore, a good bed grip and good levelling is important.

The size of the sliding top is crucial. If it's too narrow, the bumps on the top won't snap into place. If it's too wide, the top can usually still be inserted, but it becomes difficult to open.
If the top doesn't fit, it is advisable to adjust its dimensions in the slicer and reprint it. Recommended adjustments are only small increments ranging between approximately 0.2mm and 0.3mm in width (only in width).
Here is a short video explaining this:

https://youtu.be/vve-SCg9ln8

I printed the puzzle with the following settings:

Material: PLA
Resolution: 0.2mm
Infill: 20%
no supports
no raft, no brim

More information about puzzles whose pieces consist of simple geometric shapes (polyforms) can be found at

http://www.pentoma.de (in german)