侧加载单壳体匹配器优化模型

Side-loading single shell Match saver

2023-08-09 03:35:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Single shell 12 guage match saver for mounting with double-sided tape (no holes for bolts). Designed to be mounted on the right side of the gun, however can easily be mirrored when slicing for mounting on the left side. The curved bottom model fits the curve on the handguard of a Winchester SX4 perfectly, and may fit other handguards. The flat bottom model will stick best to a more flat sided handguard but can also be mounted on handguards with small curves (it also fits the Winchester SX4 nicely). The lowered cut-out makes it easier to quickly push out the shell without having your finger get caught on the match saver.

When printed with PLA and a wall thickness of 1.2 mm, the springiness of PLA makes this design hold on to a slim 6 shot shell perfectly, however, is a bit too tight for larger shot sizes. Decreasing the wall thickness to 0.8 mm makes the match saver capable for use with bulgy shells up to at least shot size 2, however, will decrease the grip on the smaller shot sizes.