2 Slot Simple Wallet

2023-08-09 03:35:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a 2 slot simple wallet. This minimalistic wallet can hold four credit/debit card sized objects, two cards to each slot.

Use this simple wallet for nearly any occasion where travelling with only the necessary cards, personal identification, or money is preferred. Common situations may be but are not limited to

A day at school - A day at the office - A day off - Field trips - Sporting events or activities - Family vacations - An extra wallet

The recommended polymer is a TPU of your choice in color with an approximate hardness of 95a. This will yield a wallet that has a comfortable flexibility while maintaining enough rigidity to stand up to the wear of activities. Results may vary.

It is recommended to use a small needle nose plier for the removal of the support material.

Be sure to check back often for more IZEKAGU products and offers. You can find IZEKAGU on Thingiverse, Cults 3D, Facebook, Instagram or check out IZEKAGU's website at
[https://izekagu.com]

*Disclaimer: IZEKAGU is not responsible for any loss or theft of personal property associated with this wallet.

Print Settings

Printer brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
Yes
Resolution:
0.35mm
Infill:
100
Filament brand:
Any
Filament color:
Any
Filament material:
TPU - 95 Hardness
Notes:
Recommended Filament: TPU - 95a hardness
Recommended Nozzle: 0.4mm
Recommended Parameter Count: 7 or 8 Lines
Recommended Infill: 100%
Recommended Layer Height: 0.35mm
Supports: Place support in each card slot.
Expected Approximate Filament Length: 10.0m
Expected Approximate Unfinished Weight: 29.0g
Expected Approximate Finished Weight: 26.0g

Recommended Additional Tools: Small needle nose plier

**Weight and filament length of unfinished/finished product will vary from the expected weight and filament length listed above.