消音器固定架

Suppressor holder / Silencer holder

2023-08-09 04:02:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Holder for suppressor/silencer/can designed to be mounted in a gun safe/cabinet using magnets (neodymium 10mm in diameter and 8mm tall) or double-sided tape. If the cabinet or safe is pained with a slick paint, attaching a piece of thin rubber or cork to the back of the holder when mounted with magnets could be necessary for not having the holder slide down. Two models are shown here with one capable of comfortably holding suppressors with a diameter of 51mm and below and one for smaller suppressors with diameters of 36mm and below (both can be expanded slightly with sanding down the inner diameter of the top ring). Both models are 12 cm tall.