Glamrock Freddy时尚版可穿戴口罩,带有开合式牙齿
Glamrock Freddy Wearable Mask with Hinged Jaw
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This is a modified version of Official_Dino55's Glamrock Freddy Head model.
Modifications to the original:
- Added hinge hardware to the upper and lower jaw. This uses standard skateboard bearings to create the talking effect when you move your mouth.
- Added holders for the ears to connect the floating pieces
- Widened the jaw hole to allow the wearer to put the mask on without disassembly
- Created eyes and eye holders which fit 44mm OD, 30mm ID 16 LED ws2812 LED rings and diffuse the light evenly.
- Provided simple Arduino code to control the eye LEDs.
- Resized the model to fit an adult's head snugly
Paint colors used:
- Rustoleum Gloss Marigold
- Rustoleum Gloss Almond
- Rustoleum Gloss Apple Red
- Rustoleum Gloss Seaside
- Rustoleum Metallic Titanium Silver
- Store Brand Gloss Black
- Store Brand Gloss White
Finishing Tips:
I used spray primer+filler and Bondo Spot and Glaze putty before the final coats with gloss spray paint and this worked really well. Apply a thin layer of Bondo, let it dry, sand it, spray with primer+filler, and repeat until the surface is as smooth as you'd like. Make sure that the last coat before painting is spray primer for best results.
Electronics:
I used 44mm OD, 30mm ID 16 LED ws2812 rings for the lights. These are daisy chained together and controlled by an Arduino Nano. The electronics are powered by a LiPo battery with a charging circuit.
See the FreddyEyes.ino file for the simple Arduino script. This just lights all of the LEDs a solid teal color.
Jaw Hinge:
Two standard skateboard bearings are needed for the jaw assembly. Elastic bands can be attached to spring the jaw closed. You may need to play around with where you attach the bands in order to get proper movement.
Post-Printing
1. Assembly
Once all of the pieces are printed, they can be assembled with super glue, friction welding, or solvent welding. Do not insert the bearings until after painting to ensure that they do not get painted/glued in place.

2. Smoothing out the parts
Alternate between sanding, spraying primer+filler, and applying bondo until the surface is smooth and layer lines are gone. Finish with one final layer of spray primer + filler.



3. Paint the mask
Paint colors used:
- Rustoleum Gloss Marigold
- Rustoleum Gloss Almond
- Rustoleum Gloss Apple Red
- Rustoleum Gloss Seaside
- Rustoleum Metallic Titanium Silver
- Store Brand Gloss Black
- Store Brand Gloss White
Paint the mask as shown (or use your own color scheme!)



4. Add the eyes and electronics
I used 44mm OD, 30mm ID 16 LED ws2812 rings for the lights. These are daisy chained together and controlled by an Arduino Nano. The electronics are powered by a LiPo battery with a charging circuit.
See the FreddyEyes.ino file for the simple Arduino script. This just lights all of the LEDs a solid teal color.
Glue the eye holders in place as shown in the rendering below, then glue the finished eyes to the eye holders.



Tags
License
Glamrock Freddy Wearable Mask with Hinged Jaw
by Gabgra11 is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
参数化的两部分模具生成器(用于OpenSCAD)2023-03-26
-
复古风格手机支架2023-06-11
-
优化版飞盘高尔夫球驱动器2024-01-11
-
宏观版块支架(适用于LG V60 ThinQ)2024-03-27
-
克利普顿自行车钥匙架(螺丝安装)2024-04-07
最热下载
-
Tcho Tcho 功率跟踪调节盘,厄运追踪器2023-03-26
-
Fillenium Malcon 3D模型打印解决方案,星球大战飞船2023-03-26
-
斯坦利杯2024-01-11
-
QC USB充电器外壳(XFW-KC42-4)2024-01-17
-
塑料扣(3D打印无需支撑设计)2024-05-08
最新模型
-
高跟鞋鞋架2025-07-17
-
跨维度外推器 - CW的闪电模型2024-05-08
-
阿塔图尔克签名3D模型2024-05-08
-
金属热板收集器2024-05-08
-
3D打印机LM12UU Y轴升降板2024-05-06