南波兰齿轮支架

south bend gear holder

2023-08-18 17:32:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I was wanting a cutom holder for some change gears that came with my South Bend #9 Lathe. The slot for the gears are 10mm wide, the 2 smallest are 11mm wide. Each gear sits halfway into the slot. The block is ruffly 97mm x 143mm x 50mm.
The print is taking around 40 hours to print with a .04mm nozzle, with the settings it is set at,

Print Settings

Printer brand:
Snapmaker
Printer:
Snapmaker 2 A350
Rafts:
No
Supports:
No
Infill:
15%
Filament brand:
esun
Filament color:
orange
Filament material:
pla

Post-Printing

Standards

Overview and Background

I was tired of the Lathe change gears laying around with no protection and having to sort them to find the size needed, seen some on Ebay but nothing with the sizes I wanted, and not knowing if my gears would fit. I made my own.

License

CC BY

south bend gear holder
by bthoward is licensed under the Creative Commons - Attribution license.

南波兰齿轮支架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

最热下载