角落安装支架，适用于后置扬声器（索尼SA-RS3S）

Corner Mount for Rear Speaker (Sony SA-RS3S)

2023-08-18 17:33:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a corner mount specifically for the Sony SA-RS3S rear speakers. It requires two screws to mount to the wall (I used anchors for extra support). The speaker does not move around in the mount very much, due to the holes for the feet to sit within and because the tabs at the back of the speaker slide into spaces in the mount so the speaker cannot tip forward (even when pulled).

There is not much space for the power cable to exit the back of the speaker, however with the cutout, this has been sufficient for me.

I printed in PETG just for some added stability versus PLA (the speakers are fairly heavy). The carbon fiber material I have matches nicely with the finish of the speaker.