Stork - 婴儿礼物
Stork - Baby Gift / Storch / Newborn Bird
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A cute gift - easy to print, too, and no need to paint it.
What worked well for me was to print the body and legs with a small brim, otherwise they would lift off or warp.
The only part that required supports was the beak, to print the little peg.
Also remember to print two eyes and wings.
The assembly is really easy. Everything should fit into place. Use a few drops of super glue for the eyes and wings.
You can use a black and white marker to add some finishing touches :)
Print Settings
- Printer brand:
Creality
- Printer:
Ender 5
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:10 %
- Filament brand:
Generic
- Filament color:
White, Black, Red
- Filament material:
PLA
- Notes:
Brim for the legs and body. Supports for the beak.
Tags
License
Stork - Baby Gift / Storch / Newborn Bird
by John_Wet is licensed under the Creative Commons - Attribution - Non-Commercial license.
联系我们
最新模型
-
康福特沃恩轮毂保护套2024-05-08 -
Taco Bell国际象棋：车棋2024-05-08 -
Taco Bell国际象棋车装饰品2024-05-08 -
史蒂夫·弗瑞机器人飞行器脚部与腿部组件更新版——来自《静默的运行》2024-05-06 -
乐高风格圆润光剑模型2024-05-06
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
小型四足机器人 - 优化第九代伺服系统2023-03-26 -
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23 -
远投笼2024-04-06
