Wall Fixing Bracket

Wrench Wall Holder

2023-08-18 22:11:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Metric wrench wall holder

This is a METRIC wrench wall holder for wrenches size 8, 10, 11, 12, 13, 14, 15, 17, and 19.

I added the OpenSCAD source file for convenience.
I wrote the file as a set of modules and a build section so it should be easy to modify it to change the metrics and texts to imperial, in the build section.

The only customizer is a text check mark. Its only purpose is to render fast while you are still changing things, if any.
In that case it's not checked. If you check it, OpenSCAD tends to be a lot slower when changing the view of the object, due to many calculations for the texts every time the angle of view or zoom rate are changed.
So, if you are satisfied with your changes, just check it for the final render (otherwise, the wrench sizes will not be printed).

The (comments) language is Dutch. You can translate it using e.g. Google translate.
Times mentioned in the comments of the .scad file are applicable for Creality CR10S V2, Normal settings, standard PLA.

The minimum bed size for this holder is 300x300mm square.
It will not print on a FLSUN V400 unless you scale it in your slicer, which is not advised.

- No support needed

I painted the charachters with Annie Sloan Guild Warm Gold wax, which must dry for at least 48 hours.

Enjoy building this!