IIDX 1P 控制面板

IIDX 1P Controller

2023-08-18 22:25:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Arcade-sized controller plans I made for a DIY IIDX controller.

Warnings and things I changed for the actual build:

Only having 2 buttons up top is a huge inconvenience. I'll be making a new design with 4 buttons along the top -eventually-
I replaced the inside disc (which I planned to use with a photointerrupt sensor) with a rotary sensor like the ones used in SDVX controllers. This was a much easier part to install and find arduino code for. I would not recommend trying to use the inside parts as designed here.
The controller is BIG. Not lap friendly. There's also quite a bit of unused space in the box vertically, so I could have made it less tall. I might update that in the next build too.
Not sure why there are button holes in the bottom piece... I made it a long time ago and didn't know how to use Fusion 360 (still don't). Just ignore them and make a flat piece obviously :)

The holes fit typical sanwa / istmall / cheap chinese buttons. Learn from my mistake and don't buy the cheap chinese buttons. Buy buttons from ISTmall. They are pricey and take a while to ship, but it's worth it, because the springs in the cheap chinese buttons will make your fingers tired after 20-30 minutes of playing. They can also slow down how fast your skill level progresses, and potentially cause injuries.