手机与望远镜专用适配器
Smartphone Adapter For Telescope
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
Adapter for attaching a cell phone to a telescope.
Made for a Samsung Galaxy S20 with and without a phone case,
but will probably work with other phones around the same size with cameras on the left side (viewed from the back).
A piece of rubber band is needed for the wheels to grab the phone.
Each wheel is numbered, likewise the frame.
Just slide the phone between the wheels, adjust the phone and tighten the bolts.
You can also adjust the height of the adapter.
Without the adapter, an eyepiece with an outer diameter of 42-46 mm will fit, with the adapter a 30-32 mm eyepiece.
Five of the bolts and two of the nuts are needed.
Let me know if you need a different size adapter and I will make one.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:0.2
- Infill:50
- Filament brand:
eSun
- Filament material:
PLA+
Tags
License
Smartphone Adapter For Telescope
by Nevik is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
.22-250 Remington 瓶式模式堆叠装填模块2023-05-12
-
微比特 V1 和 V2 移动套装2024-01-17
-
统一制 PA6 NPL-Z-03 13.62024-03-29
-
第四代Neptune Wyze摄像头支撑架2024-04-12
-
蚂蚁试管巢穴 - 试管通道 - 阿芙罗狄特巢穴2024-04-28
最热下载
-
Valorant 杰特的姿态2023-03-26
-
通用型1/10比例底盘 - DKS基础款2023-03-26
-
「春雷」弹壳弹出式泡沫飞镖发射器(进行中)2023-03-26
-
Delta设置校准为Klipper2023-04-23
-
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
Flick 19E(增强型) - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21
-
用于加长杆的戴森配件支架2025-07-17
-
高跟鞋鞋架2025-07-17
-
鞋带锁2025-07-17
-
坏龙家的大宝贝女生别下2025-06-26