DJI Air 3着陆架性能粗糙

DJi Air 3 Landing Gear ROUGH

2023-08-19 10:00:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I took the availble Air 3 model, and made some rough landing gear based on the ones for the air 2. In case anyone wants to help clean these up and not make them so bulky, or improve them.
https://www.printables.com/model/535476-dji-mavic-air-3-3d-model-file

Print Settings

Printer brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20
Filament brand:
Micro Center
Filament color:
White
Filament material:
PLA
Notes:
4 walls, 4 top and bottom, supports only to fill hole for front prop.
4hour print for all 4 pieces at 50mm
CR10v3 with BLtouch

Post-Printing

Improivements

Flies fine, but would like to make rear legs thicker, and make all 4 be more level with ground.
Need to revise angle where from prop landing gear touches ground.
Need to make rear landing gear pieces thinner, not 15mm.