摩托罗拉转动臂支架 - 改编版

Motorola Trunnion Bracket - remixed

2023-08-19 12:53:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of the GM bracket by OK1TZL. I have added additional triangular supports. I have left room if you want to inscribe radio names in the bracket. I had a friend that need to know what depart the radio was for.
This has been tested on Radius M10 and Maxtrac mobile radios.

I have left the 119mm Spacing on the deck mounting holes.I am not sure if they are the same spacing on the original Motorola trunnion bracket or not.

I also added a 24-point brake feature that mates part on the radio. This should prevent the radio from pivoting overtime with vibration.
I also added that as a separate model for other to use their own mounting projects.

I suggest printing this on the side to put the layers perpendicular to the later load.

These radios us M5 bolts in the mounting holes. I have used these M5 thumbscrews

https://www.amazon.com/gp/product/B08YY81DX8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1